Plastic production is a manufacturing method that involves shaping the melted plastic raw material into a mold by consumers, and removing it from the mold by keeping it with the use of heat. Although it is generally seen as obtaining a plastic product only by transferring the molten plastic to the mold, great care is required to complete the perfection of the plastic material. Care should be taken that the raw material used for plastic raw materials is free from moisture and dust. It is necessary to carry out target inspection and maintenance of the funnel, screw (sleeve), nozzle (nozzle), barrel and runner bushings of the injection molding machine, and to take occupational safety precautions and trainings for the vice and drive systems. With this method, plastic parts can be produced in various sizes and categories, from the smallest components to garden furniture. From the smallest parts of life to the largest parts, many parts are produced using plastic automatic molding.
Plastic Injection Pros:
• Plastic material inlet, lime, carbon, cam dust, etc. It can be produced by mixing fillers.
• Wear resistant parts with high shrinkage potential can be produced.
• Production capacity is high and mass production can be done.
• The labor cost of each manufactured piece is low.
• Provides ease of production compared to other methods.
• Parts of different shapes and sizes can be produced economically.
BağlantıThe advantages of plastic injection can be listed as follows; 1. Low cost 2. Compliance with automation 3. No need for post-processing 4. Production at high speeds 5. Compatibility with the production of parts in different surfaces, colors and shapes 6. Very little material loss 7. Different products can be produced in the same mold 8. Ability to work in low tolerances Plastic injection process should be done by a competent company. Otherwise, the plastic injection process may not work properly and the correct product cannot be obtained. To avoid this situation, you need to fully understand the plastic injection molding process. In this respect, it is important to consider the rules and factors to be considered in plastic injection molding. Plastic injection consists of 8 stages. These; It can be listed as raw material selection, melting at the right temperature, correct mold placement, closing phase of the mold, injection, cooling, mold opening and ejection. For this reason, you need to work with the most experienced plastic manufacturers in the industry with success in the fields of plastic mold making and plastic injection molding. In this way, it becomes possible to take advantage of many advantages. Thus, you get the right product and you avoid time and cost loss.